Posted By admin Posted On

Adhesive Tape Recommendation

Adhesive tape (duct tape, foil tape) is simply one of many many on a regular basis miscellaneous supplies a HVAC enterprise wants. A enterprise proprietor or buying supervisor might profit from the six easy steps beneath, which can assist you to make the only option when on the lookout for a brand new provider of adhesive tape.

With a purpose to make the correct selection, you really want some private expertise with the product, so let me share mine with you to save lots of you some useful time. The assessments beneath don’t fake to be scientific, or a substitute for lab assessments, however they’ll train you the fundamentals. Easy is just not all the time silly…

1. Check Adhesion for the most effective rule of thumb – actually! Stick your thumb to a distinct number of tapes samples. You’ll instantly really feel which of them do not stick properly sufficient. Do not even contemplate these; simply throw them away, avoiding errors. Use the samples that do cross this primary rule of thumb check and transfer on to the following step.

2. Foil power check. Make strips of tapes 1/2 inch by Three inch and stick them collectively in pairs (nose to nose, glue to attach). Attempt to pull every pair aside together with your fingers. See which aluminum foil will rip and which can maintain. Examine outcomes and select the strongest ones solely to proceed testing.

Three. Hearth retardant properties. From the remaining samples make some extra 1/2 inch by Three inch strips and mark them. Take away the protecting paper and light one of many samples with a match from one finish. Maintain the strip at a 45 o downwards angle. Do the identical with each strip, and you may dismiss those that burn with black smoke and don’t self-extinguish Double Sided Tape Heavy Duty Mounting Tape,2 Rolls B08XX3Q6Q8.

four. Adhesion. By now you’ll in all probability have 2-Three samples solely – simply as properly as a result of this check is a little bit tough! Take a chunk of sheet metallic 1 inch by four -5 inches, and guarantee that the metallic is dry and clear on either side (no oil, no dust, no water). Maintain it or prop it up vertically (a chrome steel ruler will do). Put together pattern strips of 1/2 inch by Three inches once more. Break up the samples into combined pairs (after labelling them!) and stick half of every pattern to the metallic plate (i.e. one pattern reverse one other on both sides of the metallic plate, in order that half the tape is on the plate, and half is sticking 90 levels to the metallic plate). Apply finger pressure to the samples to guarantee that the great floor contact between tape and plate is achieved. Then, seize the free ends of the samples you caught, and concurrently pull aside the tape samples. The pattern of tape with the higher adhesion will stay hooked up to the plate and the much less adhesive one will come off. Simply just remember to stick the identical tape space (1/2 ” x 1-1/2″) one towards one other, parallel, so the check is honest!